Secondary Flight Controls (Part Three) – Spoilers

in Flight Controls

Found on many gliders and some aircraft, high drag devices called spoilers are deployed from the wings to spoil the smooth airflow, reducing lift and increasing drag. On gliders, spoilers are most often used to control rate of descent for accurate landings. On other aircraft, spoilers are often used for roll control, an advantage of which is the elimination of adverse yaw. To turn right, for example, the spoiler on the right wing is raised, destroying some of the lift and creating more drag on the right. The right wing drops, and the aircraft banks and yaws to the right. Deploying spoilers on both wings at the same time allows the aircraft to descend without gaining speed. Spoilers are also deployed to help reduce ground roll after landing. By destroying lift, they transfer weight to the wheels, improving braking effectiveness. [Figure 5-19]

Figure 5-19. Spoilers reduce lift and increase drag during descent and landing.

Figure 5-19. Spoilers reduce lift and increase drag during descent and landing.

Related posts:

  1. Secondary Flight Controls (Part Two) – Leading Edge Devices
  2. Secondary Flight Controls (Part One) – Flaps
  3. Flight Controls (Part Two) – Adverse Yaw
  4. High Speed Flight – High Speed Flight Controls
  5. Flight Controls (Part Seven) – Canard

Leave a Comment

Previous post:

Next post: