Pilot and student pilot community. Share your pilot lessons or aviation stories.



Stephen Lewis

Although a portion of the terminology covered in our previous three posts (see Magic Words – Parts 1-3) dealt with phraseology specific to the airport environment, today’s installment covers parlance exclusive to the aerodrome; namely the traffic pattern. Let’s face it, landings will be one of the most difficult challenges most student pilots will encounter during the course of their flight instruction. Unless you’re an extremely gifted aviator-in-training, expect to spend some quality time flying circuits around the runway.

We’ve all heard that practice makes perfect, and such exercise shouldn’t be limited to stick-and-rudder manipulation of the flight controls. While you’re at it, aim to refine your radio communications to a concise, efficient, professional level of delivery. Doing so will add credibility to your piloting skills (Yes, really!) and can even help you get more favorable ATC handling than is offered to your radio-challenged counterparts. Below, we’ll look at some of the common phrases tower controllers will likely throw at you during the course of your traffic pattern practice.

Cleared Touch and Go”: When tower uses the words “[-aircraft ID-], Runway [-runway number], cleared touch and go,” they’re authorizing you to perform a landing directly into a subsequent takeoff. The key here is that you’re not authorized to come to a complete stop or to taxi clear of the runway. Instead, upon touchdown, you’ll adjust flaps (if applicable) and trim, add full throttle, and proceed to launch for another trip around the pattern. Requesting touch and goes is a good idea when you plan to perform a series of landings.

Cleared Stop and Go”: If you’d like to come to a complete stop and reconfigure your airplane before once again taking off, you’ll want to request a stop and go landing. As the name implies, a stop and go permits you to completely cease movement following a landing before departing from the stopped point on the runway for another circuit. However, this clearance does not authorize you to taxi clear of the runway (or to back taxi on the strip), so make sure you obtain additional clearance if you judge it’s necessary to perform either of those actions.

Why request a stop and go? There are several instances in which this procedure makes sense. For starters, night currency requirements specify that the required landings be performed to a full stop [details in 14 CFR 61.57(b) 1]. If sufficient runway length is available, performing stop and goes rather than full stop, taxi backs allows you to cut down on taxi time while practicing night landings. Additionally, stop and goes can help a pilot to avoid feeling rushed (and making mistakes) by allowing him/her a little time to reconfigure the aircraft when not in motion. In addition, short field takeoffs are commenced from a stopped position, so touch and goes are not adequate for simulating such maneuvers.

Cleared to Land”: The most common form of runway clearance, being cleared to land authorizes you to touch down, come to a complete stop (or slow to a manageable taxi speed), and taxi clear of the runway without unnecessary delay. You cannot use this clearance to continue in the traffic pattern, so be sure to request an appropriate alternative clearance if you’d like to continue practicing takeoffs and landings.

Cleared Low Approach/Missed Approach”: This clearance permits an aircraft to fly over the approved runway at low altitude (i.e. “buzz the runway”) without making contact with the surface. Though not commonly requested in the VFR training environment, such maneuvers are staples of instrument flight training (in such cases, they’re usually referred to as missed approaches).

Go Around”: Very similar to the missed approach is a procedure known as the go around (i.e. an aborted landing). The chief difference is that, whereas ATC will always clear you for a low approach, a go around can be initiated by the pilot or the controller.

Why would you (or ATC) want (you) to abort a landing? There are several reasons. On your end (particularly early in your flight training), you’ll probably approach the runway too high, too low, too fast, too slow, not properly configured, or a combination of factors from time to time. A poor approach usually results in a poor landing, so it’s often in your best interest to scrap the attempt and start fresh. In such cases, just add power, begin a climb, gradually clean up the flaps and/or landing gear (your instructor will cover the specifics) and then inform the tower that, “[-airport name-] tower, [-aircraft id-] going around.” As always, your priorities are to aviate, navigate, and communicate (in that order), so wait to call ATC until you’re safely climbing away from the surface.

On ATC’s side of the mic, they might issue you a go around when: an aircraft, vehicle, person, or animal enters the runway without clearance; a lack of appropriate separation (perhaps an aircraft delays its takeoff roll) requires you to vacate the runway environment; an aircraft lands gear up or blows a tire upon touchdown, which prevents it from exiting the runway as anticipated; or a number of other surprise developments. Additionally, wind shear or a strong, gusty crosswind might require you to abandon your approach. As a rule of thumb, any time you’re not completely comfortable with a landing approach, it’s probably best to go around.


Cleared for the Option”: The Swiss Army knife of ATC traffic pattern clearances is the term cleared for the option. This authorization gives the pilot his/her choice to execute any of the above-referenced operations as (s)he sees fit. Requesting the option is particularly beneficial when a flight instructor wishes to “mix it up” without cluing his/her student in on what’s coming up next. Another feature of the option is that you don’t need to let ATC know exactly what you’ll be doing. This clearance implies ATC flexibility, so feel free to pick and choose as you (or your CFI) wish(es).

It’s usually easy to get an option clearance when the airport is not busy, but don’t expect to be granted this authorization when the field is abuzz with activity. When several planes are utilizing the facility, ATC needs to plan to accommodate all traffic, so they’ll need to know exactly what you’ll be performing. With this in mind, be aware that ATC might change your clearance from one circuit to the next, so guard against falling victim to the lull of complacency.

 

Back to the Aviation Communication Series.

 

Aviation Radio Communication: Magic Words – Part Three

Aviation Communication

As in our previous two posts, we’ll once again examine commonly used aviation terminology you’re bound to come across over the course of your flying. Some terms might initially seem confusing whereas others are fairly obvious and easy to grasp. Certain terms will become a regular component of your routine ATC (Air Traffic Control) interactions, […]

Read the full article →

Aviation Radio Communication: Magic Words – Part Two

Aviation Communication

Following up on our previous post, we’ll look at additional aeronautical terms you’ll undoubtedly encounter in your interactions with ATC (Air Traffic Control). Whereas some terms will become a regular part of your flying, you’ll rarely (if ever) come across others in real-world operations. Regardless of the frequency of each phrase’s actual usage, a proper […]

Read the full article →

Training to Tanker Fuel

Aviation Blog

In the years since my student pilot days, it’s fair to say I’ve spent a good deal of time playing the Monday morning quarterback regarding flight instruction practices. This has been especially true since I earned my instructor ratings and began to build better mousetraps in earnest. I’ll be the first to admit that, in […]

Read the full article →

Is the Flight-Training Industry Wasting Time on Obsolete Procedures?

Aviation Blog

I spent a little time this morning perusing the FAA’s current practical test standards, required aeronautical knowledge areas, and sample written exam questions. While general aviation (GA) has seen notable advancements since I began flight training, I noticed that many of the FAA’s requisite knowledge and skill areas have failed to adapt with the times. […]

Read the full article →

Aviation Radio Communication: Magic Words – Part One

Aviation Communication

Within the aeronautical lexicon, there are many keywords at your disposal to make aviation radio communication a bit safer and more efficient than you might imagine. Even if you’re a complete aviation rookie, you’ve probably heard a few such terms thrown about in popular culture. Throughout this post, we’ll examine some of the most prevalent […]

Read the full article →

Aviation Radio Communication: Ready to Roll

Aviation Communication

Picking up from our last post, we’ll now cover the radio procedures to expect after you’ve successfully taxied to the departure runway. At this time, let’s assume we’ve reached Wittman Regional Airport’s Runway 9, and that we’re holding short of the runway at Taxiway B3 (see the airport diagram). We’re now ready to communicate our […]

Read the full article →

A Pilot’s Personal Pet Peeve: Pattern Practices

Aviation Blog

Today’s post is coming to you from my perch atop a soapbox. The issue at hand has been a thorn in my side for years, but up until now I’ve refrained from launching into an all-out tirade on the matter. However, with the Sequester resulting in the furlough of nearly 15,000 air traffic controllers and […]

Read the full article →

$100 Hamburger Runs: Enjoyable Excursions for the Aviation Crowd

Aviation Blog

For all the aeronautical rookies out there, one of the mandatory pilot benefits you must explore is the joy of partaking in $100 hamburger runs. If the concept is new to you, it’s a rite of passage that general aviation (GA) pilots (and their lucky passengers) across the country engage in with considerable enthusiasm.

Read the full article →